FAQ's

Find clear, practical answers to construction FAQs in New York, covering permits, costs, timelines, materials, and how to start a project with Star Construction INC. Whether you are planning masonry, roofing, waterproofing, or a full renovation, this page explains our workflow, what affects cost and timing, and what to expect from a site evaluation, so you can make informed decisions with confidence.
Yes. We provide a full range of construction services in Great Neck and across New York, including exterior repair and restoration, masonry and concrete work, roofing, waterproofing, and interior renovation and remodeling for residential and commercial properties. Each project starts with a site review, so the scope, materials, and method match the building, its exposure, and how it will be used.
Look for stair-step cracks in brickwork, bowing or leaning walls, sticking doors and windows, sagging floors, water stains, and spalling or crumbling masonry. Any of these can point to movement, moisture, or a failing structural element, and in New York freeze-thaw cycles can widen small cracks over time. A site inspection identifies the cause first, because patching a crack without fixing its source only hides it. For parapet problems specifically, see our guide to cracked parapet wall repair in NYC.
Yes. Every project starts with a site evaluation where we review existing conditions, look for cracks, moisture, and deterioration, and discuss what you want the finished work to achieve. The visit also flags permit or board-approval steps early, so they do not hold up the schedule later. After the evaluation you receive a no-obligation estimate with the recommended scope. To arrange one, request a free consultation.
It depends on scope, site conditions, and approvals. Smaller repairs may take a few days, while larger structural or remodeling projects can take several weeks. Permit review, co-op or condo board approval, material lead times, and weather can all add time, especially for exterior work. After the site evaluation, your estimate sets out the expected timeline for your project, so you can plan around it rather than guess.
We select materials for durability, load-bearing capacity, and resistance to moisture and freeze-thaw cycles, not for appearance alone. Brick, block, mortar, concrete, stucco, roofing, and waterproofing products must also be compatible with the existing building, so a repair does not fail at the joint between old and new work. During the site evaluation we explain why a material was chosen and what maintenance it will need, so the result lasts in New York weather.
Yes. Our work is performed in accordance with local building codes and industry standards, covering structural integrity, proper installation, and safe methods. In New York City, structural, facade, and larger renovation work may also require a Department of Buildings (DOB) permit, and we flag that step during the site evaluation rather than after work begins. Smaller surface repairs often do not need a permit, but the deciding factors are scope, structure, and the building’s use. Before starting any project, ask your contractor which permits apply, who files them, and what inspections are needed, so approvals do not delay the schedule.
Yes. We work on single-family homes, multi-unit properties, and commercial buildings, tailoring the approach to property type, usage, and structural demands. Homeowners often need masonry, roofing, waterproofing, or interior renovation, while commercial and multi-unit owners also face facade, sidewalk, and common-area work. The site evaluation, scope, and schedule are set around the building and its occupants either way, and our exterior construction services and interior renovation services cover both kinds of property.
Water damage is prevented by keeping water out and giving it a path away from the building. That means correct flashing at roofs, chimneys, and wall joints, sealed cracks and joints in masonry and stucco, waterproofing at foundations and below-grade walls, and drainage and grading that move water away from the structure instead of letting it pool. Repairs also matter: a cracked parapet cap, failed sealant, or clogged drainage point can let water in and freeze, widening the damage. During the site evaluation we look for the entry point, not just the stain, so the fix addresses the cause.
Yes. Cracked, spalled, or stained concrete, brick, and stucco can often be repaired with crack correction, joint restoration, repointing, patching, and surface treatment, restoring strength, stability, and appearance without replacing the whole surface. Replacement becomes the better choice when damage is widespread, the structure behind the surface has moved or deteriorated, or repeated patching keeps failing. The site evaluation tells you which category your surface falls into. For a sense of what drives price, see our guide to stucco repair cost in New York.
A local contractor knows New York’s freeze-thaw cycles, older masonry and brownstone construction, and the building types common in Great Neck, Queens, the Bronx, Manhattan, and Yonkers. That local knowledge helps with realistic material choices, permit and board-approval steps, and scheduling around weather and building access. It also means faster site visits when a leak, crack, or facade issue needs a prompt look. Star Construction has served the New York area since January 2018, and you can read more about the company on our about us page.
It depends on the work. Structural changes, facade and parapet work, and larger renovations in New York City often require a Department of Buildings (DOB) permit, while smaller surface repairs usually do not. In a co-op or condo, your building’s board must also approve the scope, materials, and work hours before work begins, and some boards require their own alteration agreement. During the site evaluation we flag which permits and approvals your project needs, what inspections to expect, and how they affect the schedule, so nothing stalls after work starts. See our guide to co-op and condo renovation board approval for what boards typically ask for.
There is no single price, because cost follows scope, size, materials, building access, and whether permits or board approvals are needed. A localized repair costs far less than a full facade or interior renovation, and older masonry or brownstone buildings can add complexity. The reliable way to get a number is a site evaluation: we review existing conditions, confirm the scope, and prepare an estimate that sets out the work, materials, and expected timeline. To start, request a free consultation and tell us what you want fixed or changed, and we will arrange the evaluation.