Brick & Stucco Contractors in Yonkers, NY

Brick and stucco age differently on the same Yonkers street. Brick shows failed joints and spalled faces after decades of freeze-thaw, while stucco cracks at stress points, stains where water gets behind it, and peels where repairs trapped moisture. Treating one like the other, hard mortar on soft brick or a skim coat over wet stucco, makes both worse. Star Construction INC diagnoses each material on its own terms, matches mortar and stucco mixes to the original, and fixes the water path behind the crack before finishing the surface. For brick and stucco work in New York across our New York service areas, request a free, no-obligation estimate or call (516) 998-4133.

About Our Brick & Stucco Services in Yonkers, NY

Our work in Yonkers begins with a hands-on evaluation of the wall, not just the visible damage. We check mortar hardness and joint condition, whether bricks are cracked or spalled, how stucco layers and the substrate beneath them have held up, where water may be entering, and what previous repairs were made. That evaluation decides whether the right repair is repointing, individual brick replacement, a stucco patch, or a wider resurfacing.

Material matching is where most brick and stucco work succeeds or fails. New mortar must match the old in strength, color and joint profile, because mortar that is too hard can damage softer brick. Stucco mixes must match the original in texture and thickness, and a synthetic EIFS system must be identified for what it is, in general terms, rather than treated as traditional stucco. We explain those choices before work starts.

If a permit or approval is needed for work affecting an exterior or public-facing wall, it is handled in general terms through the City of Yonkers Department of Housing and Buildings, and the current position is confirmed at evaluation.

What Is Brick & Stucco Work in Yonkers?

Brick and stucco work is the repair, replacement and resurfacing of the two most common exterior wall finishes on Yonkers homes. Brick is made of individual masonry units laid in mortar, while stucco is a coating applied in layers over a wall substrate. Both protect a building from weather, but they fail in different ways, so they must be diagnosed and repaired differently.

Our Yonkers work covers brick pointing and repointing for failed joints, stucco repair and application for cracked or damaged coatings, brick crack repair and replacement for damaged units, stucco skim coating and refinishing for worn surfaces, and EIFS stucco systems where a synthetic system is present.

Done well, matched brick and stucco work blends with the original wall, keeps water out, and stands up to freeze-thaw. Done poorly, with hard mortar on soft brick or a skim coat over a wet substrate, the same crack or stain comes back.

Professional construction services in New York — Star Construction INC

Searching for Brick & Stucco Contractors in Yonkers?

If you are searching for brick and stucco contractors in Yonkers, Star Construction INC serves homeowners, landlords and businesses across Yonkers, from older brick rows to stucco-clad homes. As brick and stucco contractors in New York, we explain the material, the water path and the finish in plain terms, and every project across our New York service areas starts with a free, no-obligation estimate.

Yonkers conditions, including older brick, mixed stucco systems, freeze-thaw and earlier repairs that trapped moisture, are checked at evaluation, so the repair addresses the cause and not only the surface.

Testimonials

See Why We’re Highly Recommended

Our clients value the consistency, structural precision, and long-term performance we deliver on every project, from initial planning through final execution.

Google
Jav V profile picture
Jav V
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Got my bathroom remodel Team was professional on time Thank you
Google
Ever fernando Perez saldaña profile picture
Ever fernando Perez saldaña
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Crear Word
Google
LUIS CAYO profile picture
LUIS CAYO
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
i hire them for my home project. and everyting went smoothly. no delays
Google
Shahid Iqbal profile picture
Shahid Iqbal
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Very reliable contractor. They did exactly what they promised and the quality was excellent. Would definitely recommend.

Get a Free Quote Today!

Contact us now to discuss your project and receive a no-obligation quote from our experts.

Our Process

Our Process — How We Work

Every project is handled through a defined process that ensures accuracy, efficiency, and long-term structural performance from start to finish.

01

Site Evaluation & Project Discussion

We begin by reviewing site conditions, understanding project objectives, and identifying structural requirements to establish a clear and practical direction before any work begins.

02

Planning & Preparation

A detailed execution plan is developed, including material selection, sequencing of work, and coordination of labor to maintain consistency and avoid delays during construction.

03

Controlled Execution

Work is carried out using proven installation methods, with attention to structural integrity, proper reinforcement, and adherence to safety and quality standards.

04

Inspection & Project Completion

A final walkthrough is conducted to verify workmanship, resolve any outstanding details, and ensure the completed project meets performance expectations and durability standards.

Benefits of Professional Brick & Stucco Services in Yonkers

Well-matched brick and stucco work in Yonkers protects the wall behind the finish, keeps water out, and holds up through freeze-thaw. It also avoids the cost of patching the same crack again and again, because the cause, not only the surface, has been addressed.

Brickwork

Brickwork covers pointing, replacement and matching. Failed mortar joints are raked out and repointed with mortar matched in strength, color and joint profile, and individual cracked or spalled bricks are replaced where the surrounding wall remains sound. The aim is a repair that blends with the original brickwork rather than standing out as a patch.

Stucco

Stucco work covers cracks, patches, resurfacing and the distinction between traditional stucco and EIFS. Stable, limited cracks are patched in layers and finished to match the surrounding texture, while widespread cracking, delamination or substrate damage may need wider patching or resurfacing. EIFS, a synthetic stucco system, is identified in general terms and repaired by its own detailing, not treated as traditional stucco.

Water paths — the cause behind most cracks

Most recurring cracks have a water path behind them: water getting behind stucco, failed flashing, a leaking gutter, or joints that let water into the wall. We trace that path at evaluation and fix it before finishing the surface, because a new finish over a wet substrate will crack, stain or peel again. The finish is the last step, not the repair itself.

Matching materials and finishes

Mortar strength and color, brick type, stucco mix, texture and thickness are matched to the original wall and to Yonkers exposure. We explain the finish, the curing and coating steps, and the maintenance that keeps the repair sound, so the finished wall looks like it belongs to the house rather than like a repair.

Gallery

Proven Quality, Best Results

Recent masonry, roofing, concrete and renovation work completed for residential and commercial properties across New York.

Why Choose Us

Where Construction Meets Accountability

Repointing replaces failed mortar joints only, while the bricks themselves stay in place. Replacement removes individual cracked, spalled or otherwise damaged bricks and sets new units in matched mortar. Repointing suits walls where the joints have failed but the bricks are sound; replacement suits walls where the units themselves are damaged.

Often it can be patched. Limited, stable cracks are repaired in layers and finished to match the surrounding texture. Resurfacing is usually needed when cracking is widespread, the coating has separated from the substrate, or the same area keeps failing after patching. The condition of the substrate and the cause of the cracking decide which approach is right, and that is confirmed at evaluation.

Usually because the underlying cause was not fixed. Cracks return at stress points, such as corners and openings, where movement concentrates, or where water keeps getting behind the coating, or where an earlier repair trapped moisture or used an incompatible mix. A lasting repair traces the water path and the movement first, then finishes the surface.

Staining, bubbling, soft or separated areas, peeling and damp patches near a wall are signs that water may be involved, but they do not prove it on their own. At evaluation we check the coating, the substrate and the likely water paths, such as flashing, gutters and joints, so the source can be addressed before the surface is finished.

It depends on whether the cause was fixed, how well the mix and finish match the original, how exposed the wall is, and how it is maintained. A well-matched repair with the water path fixed lasts far longer in freeze-thaw weather than a cosmetic patch over a wet substrate. We explain the expected maintenance for your wall at evaluation rather than promising a set number of years.