Yonkers facades tell the building’s age at a glance — handsome pre-war brick and stone on Getty Square and North Broadway apartment buildings, Tudor and Colonial fronts in Park Hill and Crestwood, and cornices and detailing that need skilled hands, not generic patching. When mortar, stone or cornice detailing fails, water and loose material follow — a safety issue as well as a cosmetic one. Star Construction INC restores each material properly, secures loose elements, and leaves the elevation weather-tight and true to its original character. For facade repair and restoration in New York across our New York service areas, request a free, no-obligation estimate or call (516) 998-4133.
Facade work in Yonkers starts with a hands-on survey of the whole elevation: brick, stone, stucco and cornice, mortar joints, lintels, sills and coping, and the anchors and flashings behind them. We look for cracks, displacement, staining and loose material, and for the water paths that explain interior damp, so the scope matches what the wall actually needs.
Each material is then restored on its own terms — brick repointed and replaced to match, stone repaired or replaced in kind, stucco renewed, and cornice and trim rebuilt and secured — with compatible mortars and sealants, so repairs weather with the original wall rather than standing out from it.
Where the work needs permits or approvals, these are handled in general terms through the City of Yonkers Department of Housing and Buildings, with the position for the building confirmed at evaluation.
Facade repair and restoration is the rehabilitation of a building’s exterior wall system: the masonry, stucco, stone and trim that face the weather, and the joints, anchors and waterproofing that hold them together. It runs from localised repointing and crack repair to full elevation restoration, depending on what the survey finds.
In Yonkers, a restoration scope commonly covers brick and stucco work, masonry restoration, waterproofing and sealants, and parapet wall repair and installation where the roofline meets the facade, together with exterior repair and renovation where the wider envelope needs attention.
The point is not a cosmetic coat over failing material: loose or water-damaged elements must be secured or replaced, and the joints and waterproofing renewed, or the same defects will reopen with the next freeze-thaw cycle.

Star Construction INC serves homeowners, landlords and businesses across Yonkers, from Getty Square and North Broadway apartment buildings to Tudor and Colonial fronts in Park Hill and Crestwood. If you are looking for facade repair and restoration contractors in New York, we survey the elevation, explain the scope in plain terms, and give a free, no-obligation estimate.
Yonkers conditions shape every scope we write: older brick and stone, decades of freeze-thaw, wind at exposed elevations, and earlier patch repairs that can hide water entry. Each is checked at evaluation, and you can also find us through our New York service areas.
Our clients value the consistency, structural precision, and long-term performance we deliver on every project, from initial planning through final execution.
Contact us now to discuss your project and receive a no-obligation quote from our experts.
Every project is handled through a defined process that ensures accuracy, efficiency, and long-term structural performance from start to finish.
We begin by reviewing site conditions, understanding project objectives, and identifying structural requirements to establish a clear and practical direction before any work begins.
A detailed execution plan is developed, including material selection, sequencing of work, and coordination of labor to maintain consistency and avoid delays during construction.
Work is carried out using proven installation methods, with attention to structural integrity, proper reinforcement, and adherence to safety and quality standards.
A final walkthrough is conducted to verify workmanship, resolve any outstanding details, and ensure the completed project meets performance expectations and durability standards.
Proper facade work protects the whole building: it keeps the elevation structurally sound, weather-tight and true to its original character, secures loose material before it becomes a hazard, and stops water at the joints and surface instead of letting it travel into the wall.
Every job starts with a survey that ranks safety first: loose, cracked or displaced material is identified and secured or removed before it can fall, and the elevation is checked for the defects that let water in. The survey then sets the repair order, so urgent hazards and active leaks are dealt with before cosmetic work.
Brick is repointed and replaced to match the original in size, colour and texture; stone is repaired or replaced in kind; stucco is renewed over a sound base; and cornice and trim are rebuilt, anchored and sealed. Matching material and mortar matters: repairs that look and behave like the original last longer and keep the elevation’s character intact. See also our brick and stucco work, masonry restoration and waterproofing and sealants services.
Most facade leaks are detailing failures: open joints, failed sealants, cracked coping or sills, and breaks where the wall meets the roof or windows. Renewing joints and sealants, repairing coping and sills, and making the waterproofing continuous across those junctions stops water at the surface instead of trapping it behind the finish.
For occupied apartment and commercial buildings, work is phased by elevation or section, with safe access, protection below, and the building kept weather-tight between stages. Tenants and businesses stay in place while each section is completed, and the sequence and timescale are agreed after the survey.
Facade restoration includes the repair and renewal of the exterior wall system: brick and stone repair and replacement, repointing, crack repair, joint replacement and sealant renewal, stucco renewal, cornice and trim repair, and waterproofing and protective coatings. The exact scope depends on what the facade survey finds, and structural stabilisation is included where anchors or masonry have failed.
As general guidance, a facade should be looked over regularly and given a closer inspection whenever warning signs appear — cracks, loose or displaced material, staining, or water entry near the top floor or around windows. Older brick and stone buildings, and elevations exposed to wind and weather, benefit from more frequent checks, and any loose material should be dealt with promptly rather than left to the next routine visit.
Yes, in most cases. Work is phased by elevation or section, with safe access and protection below, and each section is left weather-tight at the end of the working day. Noisy or disruptive stages are scheduled and communicated in advance, and the building remains in use throughout. Where a section is unsafe, that area is secured first and the sequence adjusted.
Matching starts with identifying the original brick or stone by size, colour, texture and finish, and the mortar by colour and composition. Units are sourced or fabricated to that match, and trial panels confirm the blend before full installation, so repairs sit naturally in the existing wall rather than standing out as patches.
Keep people away from the area below the elevation, and do not try to pull loose material down yourself. Arrange a prompt facade evaluation so loose elements can be secured or removed safely and the cause — failed anchors, cracked masonry, or water damage — can be identified before the repair scope is set.