
As paint renovation and general contractors in New York, we bring the same thorough prep and finish standards to Flushing that we apply across the city, shaped for the homes and buildings here. Star Construction INC serves all of our service areas with consistent quality, and in Flushing that means planning around occupied co-ops and apartment buildings, older plaster that has been patched many times, and woodwork layered with decades of recoats. We start by looking at each surface in daylight, finding why a finish failed, and fixing that cause before we paint, so the new coat is not covering a problem that will return.
Paint renovation in Flushing starts with understanding the surface underneath the paint. Pre-war plaster in co-ops near Downtown Flushing needs cracks repaired and loose sections stabilised before any finish goes on, while drywall and plaster repair in newer rooms still needs seams taped, fasteners set and patches feathered flat. Woodwork in Murray Hill and Auburndale often carries many old coats, so edges must be cleaned and sanded smooth rather than buried under another thick layer. Outside, exterior painting must suit the material: masonry needs coatings that let moisture escape, wood needs flexible primers and caulking at joints, and metal needs rust treatment first. Only after repair, cleaning and priming does the finish coat earn its keep.

Property owners, landlords and co-op shareholders across Flushing call us for apartment repaints, hallway and common-area work, full interior refreshes and exterior repaints. Tell us about peeling paint, faded siding, cracked plaster or a unit that needs turning over, and we will look at the job in person and explain the prep, the finish and the sequence before work starts. If your project also needs interior renovation and remodeling in Flushing, we can coordinate painting with that work so finishes are protected and rooms are completed in the right order. Request a free, no-obligation estimate and we will quote the full job, not just the paint.
Our clients value the consistency, structural precision, and long-term performance we deliver on every project, from initial planning through final execution.
Contact us now to discuss your project and receive a no-obligation quote from our experts.
Every project is handled through a defined process that ensures accuracy, efficiency, and long-term structural performance from start to finish.
We begin by reviewing site conditions, understanding project objectives, and identifying structural requirements to establish a clear and practical direction before any work begins.
A detailed execution plan is developed, including material selection, sequencing of work, and coordination of labor to maintain consistency and avoid delays during construction.
Work is carried out using proven installation methods, with attention to structural integrity, proper reinforcement, and adherence to safety and quality standards.
A final walkthrough is conducted to verify workmanship, resolve any outstanding details, and ensure the completed project meets performance expectations and durability standards.
Good paint work is mostly preparation, and Flushing surfaces test that preparation. Here is how we deliver lasting results in Flushing.
Inside a Flushing home, we repair before we paint. Plaster cracks are opened, filled and sanded flat, drywall seams are taped and finished, and water stains are traced to their source rather than simply covered. Co-op rules, shared hallways and occupied rooms shape the schedule, so we protect floors, seal work areas and keep dust contained. Rooms are then primed with the right primer for the surface and finished in a washable coating suited to kitchens, baths, bedrooms and hallways, with trim and doors finished separately so edges stay crisp.
Flushing exteriors face humid summers, driving rain and freeze-thaw winters, so siding, trim and masonry are prepared for weather, not just colour. We wash and scrape loose paint, caulk joints and gaps, prime bare wood and repair damaged boards before coating, and we choose exterior coatings suited to each surface so water is kept out and the finish flexes with temperature change. Exterior power washing and surface preparation are done carefully, at pressures that clean without damaging wood or mortar, and work is scheduled in suitable weather so coats cure properly rather than being rushed in damp or extreme cold.
Colour should suit the light, the room and the building, not just a swatch. In Flushing co-ops and homes we test colours on the wall in daylight and evening light, because north-facing rooms and older plaster can shift a shade. For kitchens and baths we recommend washable, moisture-resistant finishes; for living areas, a softer finish that hides minor wall variation; and for trim, a harder, wipeable finish that stands up to cleaning. If you would like guidance, our colour consultation and custom finishes help narrow choices to a small set of samples before you commit to a full room.
Our prep standard is the same on a single room and a full exterior: inspect in daylight, repair the substrate, clean the surface, sand or scuff for adhesion, caulk and prime, then apply finish coats at the coverage the product requires. We do not paint over peeling paint, active leaks or loose plaster, and we tell you plainly when a repair must come first. That sequence is why a Flushing finish holds its colour, resists moisture and needs repainting less often, and it is included in every free, no-obligation estimate, with the prep for each room or elevation explained before work begins.
It depends on the surface, exposure and preparation. In Flushing, a well-prepared exterior often lasts several years, while south-facing trim, wood siding and surfaces exposed to driving rain may need attention sooner. We inspect the paint in daylight, check for peeling, chalking and failed caulking, and tell you whether a touch-up, a partial repaint or a full repaint makes sense, rather than repainting on a fixed schedule.
Yes. Plaster repair comes before painting in our sequence. Cracks are filled, loose plaster is stabilised or replaced where needed, and patches are sanded flat and primed so the repair does not show through the finish. Painting over damaged plaster without repair usually leads to the same cracks and peeling returning quickly.
Kitchens and baths need a washable, moisture-resistant finish that can be cleaned without wearing through. We usually recommend a satin or semi-gloss type finish for walls in these rooms and a harder finish for trim and doors, chosen for the specific surface and ventilation in the room. The exact product depends on the substrate and the condition of the existing paint.
Interior painting can be done year-round in Flushing, as long as rooms are heated and ventilated so paint cures properly. Exterior painting in winter is more limited: surfaces must be dry and temperatures suitable for the product being used, so very cold, wet or freezing spells mean waiting for a suitable window. We will tell you honestly when conditions are not right for exterior work.
Yes. Interior and exterior painting can be combined in one job and sequenced so work is efficient and finishes are protected. We quote the interior and exterior work separately within the same estimate, so you can see what each part involves, and we schedule exterior work in suitable weather while interior work continues.