
Brick and stucco work in Flushing starts with a wall assessment, not a quote over the phone. As brick and stucco contractors in New York, we bring the same evaluation-first approach to Flushing that Star Construction INC has applied across New York City since 2018.
Our Flushing work covers brick pointing and repointing, stucco repair and application, brick crack repair and replacement, stucco skim coating and refinishing and exterior waterproofing for masonry. See our full list of service areas for the neighborhoods we cover.
Material choice is practical: mortar must match the old in strength and color, stucco must suit the substrate and exposure, and cost depends on the wall’s condition, the area involved and access. We explain each choice before work begins.
Brick and stucco are two of the most widely used exterior construction systems in New York. Brick is a structural masonry material: individual units laid in mortar that carry load and shed weather. Stucco is a protective coating applied over a wall surface in layers, shielding the structure behind it. In Flushing both systems appear side by side: brick on the downtown apartment buildings and the 1920s houses, stucco on many Murray Hill and Auburndale homes.
Brick repair and repointing in Flushing. On century-old brick, mortar softens and washes out of the joints, and bricks begin to spall as water gets in and freezes. Repointing removes the failed mortar to a sound depth and replaces it with a compatible mix, restoring the bond and the weather seal. Where bricks themselves are cracked or spalled, brick crack repair and replacement swaps individual units without disturbing the surrounding wall, and brick pointing and repointing renews the joints around them.
Matching mortar and brick. On old masonry, matching matters for more than appearance. Mortar that is harder than the original brick traps moisture and forces the brick face to fail instead of the joint, so the replacement mix must match the old in strength as well as color, sand and joint profile. We test the existing mortar, match it as closely as the wall allows, and tool the joints to the original profile so repairs blend in rather than stand out.
Stucco repair and resurfacing. Stucco cracks for a few honest reasons: building movement, moisture behind the surface, a failed substrate, or a coating applied too thin or over an unprepared wall. Hairline cracks can often be repaired locally, but widespread crazing, hollow-sounding areas or staining point to a deeper problem. Stucco repair and application handles localized damage, while stucco skim coating and refinishing restores a uniform texture across a whole elevation when the surface has generally failed.
Water behind the surface. The most expensive mistake in masonry work is cosmetic: patching or painting over a wall that is still wet behind the finish. Before any finish coat, we check for the entry point — failed flashing, open joints, cracked sills, or missing sealant — and confirm the substrate is dry and sound. Where water has been entering for years, exterior waterproofing for masonry and related structural repairs such as lintel and shelf angle repair or chimney repair and rebuilding may come first. For wider masonry work, see our masonry contractors in Flushing; for historic fronts, brownstone and historic façade restoration applies the same matching discipline, and EIFS stucco systems can add insulation to suitable walls.

If you are searching for brick and stucco contractors in New York who work in Flushing, the first step is an inspection, not a quote over the phone. At Star Construction INC, we check mortar condition, brick soundness and moisture behind the finish, photograph what we find and explain whether a repair, a resurface or a larger intervention is the honest answer.
We work with homeowners, landlords, co-op boards and property managers across Flushing, including downtown, Murray Hill and Auburndale. Our service areas page lists the neighborhoods we serve. Request a free, no-obligation estimate and we will inspect, photograph and explain the options before any work begins.
Our clients value the consistency, structural precision, and long-term performance we deliver on every project, from initial planning through final execution.
![]()
Jav VTrustindex verifies that the original source of the review is Google.
Got my bathroom remodel Team was professional on time Thank you![]()
Ever fernando Perez saldañaTrustindex verifies that the original source of the review is Google.
Crear Word![]()
LUIS CAYOTrustindex verifies that the original source of the review is Google.
i hire them for my home project. and everyting went smoothly. no delays![]()
Shahid IqbalTrustindex verifies that the original source of the review is Google.
Very reliable contractor. They did exactly what they promised and the quality was excellent. Would definitely recommend.
Contact us now to discuss your project and receive a no-obligation quote from our experts.
Every project is handled through a defined process that ensures accuracy, efficiency, and long-term structural performance from start to finish.
We begin by reviewing site conditions, understanding project objectives, and identifying structural requirements to establish a clear and practical direction before any work begins.
A detailed execution plan is developed, including material selection, sequencing of work, and coordination of labor to maintain consistency and avoid delays during construction.
Work is carried out using proven installation methods, with attention to structural integrity, proper reinforcement, and adherence to safety and quality standards.
A final walkthrough is conducted to verify workmanship, resolve any outstanding details, and ensure the completed project meets performance expectations and durability standards.
Professional brick and stucco work in Flushing pays for itself in fewer callbacks, fewer leaks and a wall that still looks right years later. Matched materials, sound substrates and water kept out of the wall are what separate a repair that lasts from one that peels or cracks within a season.
On century-old buildings, sound joints restore the load paths the wall was built with. Fresh, compatible mortar re-bonds bricks that had loosened, and replaced spalled units carry their share again, so the wall regains the strength it lost as its joints washed out.
Tight joints, sealed cracks and sound flashing keep wind-driven rain out of the wall. That matters most in winter, when water trapped behind brick or stucco freezes, expands and turns a hairline crack into a spalled face or a hollow, delaminated patch.
A compatible mortar mix and a stucco coating applied in layers over a dry, prepared substrate hold up season after season. Durability comes from the preparation — matching strength, curing properly and confirming the wall is dry before the finish goes on.
Well-matched brick and stucco work lifts curb appeal and reassures buyers, tenants and co-op boards that the building is maintained. It also avoids the larger cost of a rebuild: joints and coatings renewed on time are far cheaper than a wall that has to be taken down and rebuilt.
Look at the mortar joints. Repointing is due when mortar is soft, crumbling or recessed behind the brick face, when you can scrape it out with a key, or when bricks are loose or starting to spall. Water staining below sills and parapets is another warning sign. If the joints are still full and hard, the wall probably does not need repointing yet.
Yes, closely. We test the existing mortar for color, sand and hardness, then mix a compatible replacement and tool it to the original joint profile. Matching strength matters more than color alone: on old brick, mortar that is too hard traps moisture and damages the brick face, so the mix is chosen for compatibility first and appearance second.
The usual causes are building movement, moisture trapped behind the surface, a failed or shifting substrate, or a coating applied too thin or over an unprepared wall. Fine hairline cracks are often cosmetic, but wider cracks, hollow-sounding areas or staining usually mean water is getting behind the finish and should be investigated before patching.
It depends on the extent of the damage. Isolated cracks and small damaged areas can be patched and blended. When cracking is widespread, the surface has hollow or delaminated sections, or the texture has generally failed, resurfacing the whole elevation gives a uniform finish and a longer-lasting result. Cost depends on the area and condition of the wall.
It depends on the size of the job, the condition of the wall, access and curing time. Small repointing or patching jobs often take a day or two, while a full elevation or a wall that needs structural repair first takes longer. We give a realistic schedule after inspection, since mortar and stucco need proper curing and cannot be rushed in poor weather.